From: "Richard Vonzel" <richard.vonzel@1:154/110.remove-xid-this>

So for some reason my TICKIT can't find the passwords for the nodes. I have them in my setting for my uplinks but I get the following error. Also it's saying the file file directory isn't there, which it is. Any ideas what's wrong?

Thanks,
Rick V

Richard


Rick V

Rick V
--- SBBSecho 3.23-Win32
* Origin: The File Cabinet BBS (filecabi.casacam.net:1025) (1:154/110)
--- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)

From: "Digital Man" <[email protected]-p2-this>

To: Richard Vonzel
Re: TicFilePwd problem
By: Richard Vonzel to All on Wed Feb 05 2025 02:31 pm

So for some reason my TICKIT can't find the passwords for the nodes.

This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

I have
them in my setting for my uplinks but I get the following error.

No error was provided.

Also it's
saying the file file directory isn't there, which it is. Any ideas what's wrong?

Not offhand. The error message might be helpful.

Thanks,
Rick V

Richard

Rick V

Rick V

You got a lot of sigs there. :-)
--
digital man (rob)

Synchronet "Real Fact" #7:
The name "Synchronet" was suggested by Steve Deppe (Ille Homine Albe) in 1991 Norco, CA WX: 59.0°F, 83.0% humidity, 4 mph WNW wind, 0.01 inches rain/24hrs --- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)

From: "Richard Vonzel" <richard.vonzel@1:154/110.remove-esj-this>

To: Digital Man

This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from
one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

I'll give that a try. I don't have tickit.cfg file though, bit in the sbbsecho.ini the uplinks are in 5D format.

I have
them in my setting for my uplinks but I get the following error.

No error was provided.

Also it's
saying the file file directory isn't there, which it is. Any ideas what wrong?

Not offhand. The error message might be helpful.

Thanks,
Rick V

Richard

Rick V

Rick V

You got a lot of sigs there. :-)

I know. I've edited the sig to remove them but it keeps adding them too. Strange.

Rick V

--- Mystic BBS v1.12 A49 2023/01/28 (Windows/64)
* Origin: The File Cabinet BBS [filecabi.casacam.net:1025] (1:154/110)
--- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)

From: "Digital Man" <[email protected]-11pw-this>

To: Richard Vonzel
Re: Re: TicFilePwd problem
By: Richard Vonzel to Digital Man on Wed Feb 05 2025 03:26 pm

This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

I'll give that a try. I don't have tickit.cfg file though, bit in the sbbsecho.ini the uplinks are in 5D format.

Sorry, correction: tickit.ini
--
digital man (rob)

This Is Spinal Tap quote #38:
Artie Fufkin: I'm not asking, I'm telling with this. Kick my ass.
Norco, CA WX: 64.6°F, 73.0% humidity, 0 mph SW wind, 0.01 inches rain/24hrs
--- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)

From: "Gamgee" <[email protected]-7iq-this>

To: Richard Vonzel

Richard Vonzel wrote to Digital Man <=-

This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from
one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

I'll give that a try. I don't have tickit.cfg file though, bit in
the sbbsecho.ini the uplinks are in 5D format.

Your tickit config is contained in ../ctrl/tickit.ini

Please note the warning in there that you must define *EITHER* a "Dir"
or a "Path" keyword for each connected file area, but *NOT* both. Very
common config error...

Also double-verify that you have a TIC password defined in the uplink
node's configuration block in sbbsecho.ini



.... HAL 9000 - Dave. Put down those Windows disks. Please, Dave.
--- MultiMail/Linux v0.52
■ Synchronet ■ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
--- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)

From: "Richard Vonzel" <richard.vonzel@1:154/110.remove-rde-this>

To: Digital Man

Hello Digital!

05 Feb 25 14:13, you wrote to me:

Re: Re: TicFilePwd problem
By: Richard Vonzel to Digital Man on Wed Feb 05 2025 03:26 pm

This is a frequently asked question and the cause is usually

that 5D

addressing was used in either tickit.cfg or sbbsecho.ini and

not in the

other. Try adding or removing the domain part of the FTN

address from

one or the other configuration (i.e. 1:103/705@fidonet is not

the same

address as 1:103/705).

I'll give that a try. I don't have tickit.cfg file though, bit
in the sbbsecho.ini the uplinks are in 5D format.

Sorry, correction: tickit.ini

I edited the sbbsecho.ini and removed the @fidonet, @fsxnet and that fixed that issue. Ran TICKIT and all passwords run fine.

Richard


--- GoldED+/W64-MSVC 1.1.5-b20180707
* Origin: The File Cabinet BBS [filecabi.casacam.net:1025] (1:154/110)
--- Synchronet 3.20c-Linux NewsLink 1.2
* Vertrauen - Riverside County, California - telnet://vert.synchro.net
--- NewsGate v1.0 gamma 2
* Origin: News Gate @ Net396 -Huntsville, AL - USA (1:396/4)